Home  /  Daily Current Affairs  /  16-10-2021 / International E-Waste Day

International E-Waste Day

Posted on October 16, 2021 by admin1  450

In News

  • Every year 14th October is celebrated as  International E-Waste Day.

International E-Waste Day (IEWD) 

  • The day was developed in 2018 by the WEEE Forum, a Brussels-based non-profit  association of e-waste collection schemes.
    • WEEE stands for waste electronic and electrical equipment. 
  • Theme:  
    • “Consumers are the key to the Circular Economy” 
  • Aim: 
    • To promote the correct disposal of e-waste throughout the world by increasing re-use, recovery and recycling rates. 
  • 2021 is the 4th edition of the International E-Waste Day. 
  • This year’s International E-Waste Day will focus on the crucial part each of us has in making circularity a reality for e-products.

Some shocking Statistics

The Brussels-based non-profit gave some shocking statistics about the rising tide of e-waste.

  • Year 2021 has generated a total of about 57.4 million tonnes (MT) of waste electronic and electrical equipment (WEEE). 
    • This will be greater than the weight of the Great Wall of China, Earth’s heaviest artificial object.
  • In 2019, Global E-waste Monitor reported 53.6 MT of WEEE .
    • It shows  a 21 percent jump in the five years since 2014. 
  • E-waste is predicted to reach 74 MT by 2030.
  • E-waste generation was increasing annually by 2 MT.
  • An estimated 40 percent of heavy metals in US landfills come from discarded electronics.

Reasons behind High E-Waste Generation and Less Recycling

  • Higher consumption rate of electronics:
    • Some 54-113 million mobile phones, weighing 10-20 tonnes, are lying in drawers and other storage spaces.
  • Shorter product life cycles:
    • It was found that the previous phones got slow as soon as new upgrades and new models were launched in the market.
  • Limited repair options:
    • Many manufacturers like Apple and Samsung, don’t allow repair and reuse facilities.
    • The Environmental Protection Agency of the USA estimates that more than 151 million phones a year- approximately 416,000 a day- are trashed and end up incinerated or landfilled.
  • Hesitancy and Unawareness among Consumers:
    • A key factor in used electronic devices not being given for recycling was because consumers themselves did not do so.

Implications of not recycling or reusing

  • Environmental Implications:
    • As long as citizens don’t return their used, broken gear, sell it, or donate it, mining of all-new materials will continue .
    • It will cause great environmental damage. 
  • Loss of precious resources:
    • The recovery of gold and other material from waste saves a lot of carbon dioxide emissions when compared with virgin metal mining.
  • Economic Implications:
    • A tonne of discarded mobile phones is richer in gold than a tonne of gold ore. 
    • High-value, recoverable materials conservatively valued at $57 billion , a sum greater than the Gross Domestic Product of most countries ,
      • Were mostly dumped or burned in 2019 rather than being collected for treatment and reuse.

Way Ahead

  • Awareness Drive:
    • Successfully raising collection rates would require participation of  every actor, including consumers, producers.
    • Get more dead or unused plug-in or battery-operated products to facilities where they can be either repaired or recycled.
  • Government Intervention:
    • Incentivising the consumers will help in waste collection.
    • A provision of penalty for violation of rules to be introduced.
  • Circular Economy:
    • The recycling will enable the recovery of a king’s fortune in valuable materials and reduce the need for new resources.
  • Right to Repair:
    • The EU is leading in such a paradigm under which the consumers are being empowered to reuse their electronic products.

E-waste (Management) Amendment Rules, 2016

  • Collection Targets:
    • The e-waste collection targets under EPR have been revised and will be applicable from 1 October 2017.
    • The phase-wise collection targets for e-waste in weight shall be 
      • 10% of the quantity of waste generation as indicated in the EPR Plan during 2017-18, 
      • with a 10% increase every year until 2023.
    • After 2023 onwards, the target has been 70% of the quantity of waste generated as indicated in the EPR Plan.
  • New Inclusions in E-waste:
    • Compact Fluorescent Lamp (CFL) and other mercury containing lamp brought under the purview of rules.
  • Extended Product Responsibility:
    • Collection mechanism based approach has been adopted to include collection centre, collection point, take back system etc for collection of e – waste by Producers under Extended Producer Responsibility (EPR).
    • Provision for Pan India EPR Authorization by CPCB has been introduced replacing the state wise EPR authorization.
    • Separate e-waste collection targets have been drafted for new producers, i.e. 
      • those producers whose number of years of sales operation is less than the average lives of their products. 
    • The average lives of the products will be as per the guidelines issued by CPCB from time to time.
    • Producer Responsibility Organizations (PROs) shall apply to the Central Pollution Control Board (CPCB) for registration to undertake activities prescribed in the Rules.
  • Collection and Refurbishing Mechanism has been set up:
    • The dealer, if collecting on behalf of the producer, needs to collect the e – waste by providing the consumer a box and channelize it to the Producer.
    • Dealer or retailer or e – retailer shall refund the amount as per take back system or Deposit Refund Scheme of the producer to the depositor of e – waste.
    • Refurbishers need to collect e – waste generated during the process of refurbishing and 
      • They should channelise the waste to authorised dismantler or recycler through its collection centre and seek 1 time authorization from SPCB.
  • Cost for sampling Hazardous Substances:
    • Under the Reduction of Hazardous Substances (RoHS) provisions, cost for sampling and testing will be borne by the govt for conducting the RoHS test.
    • If the product does not comply with RoHS provisions, then the cost of the test will be borne by the Producers.

 

For more details related to e-waste generation & Policy Paper on Circular Economy to Deal with E-Waste of Meity. Kindly go through this link.

Source: DTE

 
Previous article Tackling Drug Trafficking From Afghanistan
Next article Syama Prasad Mookerjee Port